SR-100 – Simonds Snap Ring Tool

SR-100
Simonds Snap Ring Tool

Simonds standard line of tools made to the specific need of your production line.

Simonds pneumatic snap ring tools make quick work of frustrating c-rings, circlips and retaining rings. Jaw options give you 45? or 90? angle options to make the job even easier. Available with hand controls as seen here or with optional foot operational control and bench mounts.

Automotive hinge pin tools, Oteker? clamp tools, and harness crimping tools are only a small example of special tools designed and manufactured to solve an opportunity on the production line.

Snap ring pliers on an air powered tool.
Depening on the power pack used the Simonds SR-100 snap ring tool can handle rings ranging from 1/4 inch (6.35mm) through to 6 inch? (152.4mm.)

Jaw sets are hardened tool steel and feature vertical 45?or 90? tips (optional) for hard to reach into areas.
Snap Ring Size: 1/4? diameter to 6? diameter.

The standard Simonds SR-100 Snap pring tool has a jaw openeing adjustment screw located at the rear of the SP-001-SR power pack.

Power Packs that can use the be used with the Snap ring tool are MSP-1 through to SP-002

Configurations: Complete tools with replaceable/repairable jaws.

Specification:

Snap Ring SR-100 Tool Options
Jaw Set Part Number	SR-1	SR-1-45	SR-1-90
Angle	0? Straight (as shown in photo)	45?	90?
Max Opening	1.5″ Center to center	1.5″ Center to center	1.5″ Center to center
Closed Dimension	9/32″	9/32″	9/32″
Max Snap Ring Thickness	1/8″	1/8″	1/8″

 

Simonds offers off-the-shelf tools for internal snap rings that meet these critical data points:

3/32? snap ring eye hole minimum diameter Have a maximum opening of 1.4? or less (W in the drawing) Have an overall thickness of less than 1/8? (T in the drawing)

 

For Complete prices on the tool you require please contact us as these tools are assebled to the specification that you require.

Contact Sales on:
Tel: 01462 620685
Email: [email protected]